Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

CLOSE THIS BOOKSoap Production (CDI, 1995, 70 p.)
VIEW THE DOCUMENT(introduction...)
VIEW THE DOCUMENT1. INTRODUCTION
VIEW THE DOCUMENT2. GENERAL INFORMATION ON SOAP
VIEW THE DOCUMENT3. THE RAW MATERIALS
VIEW THE DOCUMENT4. THE MANUFACTURE OF SOAP
VIEW THE DOCUMENT5. THE TREATMENT OF OILS AND FATS
VIEW THE DOCUMENT6. SAPONIFICATION: COLD PROCESS
VIEW THE DOCUMENT7. SAPONIFICATION: SEMI-BOILED PROCESS
VIEW THE DOCUMENT8. SAPONIFICATION: FULL BOILED PROCESS
VIEW THE DOCUMENT9. SAPONIFICATION: CONTINUOUS PROCESS
VIEW THE DOCUMENT10. THE COOLING AND DRYING OF SOAP
VIEW THE DOCUMENT11. FINISHING SOAP
VIEW THE DOCUMENT12. PRODUCTION OPTIONS
VIEW THE DOCUMENT13. GENERAL CONSIDERATIONS FOR MANUFACTURING PROCESSES
VIEW THE DOCUMENT14. CDI EXPERIENCE IN SOAP FACTORY PROJECTS
VIEW THE DOCUMENT15. IMPLEMENTING A SOAP FACTORY PROJECT
VIEW THE DOCUMENT16. EQUIPMENT MANUFACTURERS
VIEW THE DOCUMENT17. TURNKEY SUPPLIERS AND ENGINEERING OFFICES
VIEW THE DOCUMENT18. THE SOAP MAKERS
VIEW THE DOCUMENT19. DEVELOPING A SOAP FACTORY PROJECT
VIEW THE DOCUMENT20. CHECKLIST: RAW MATERIALS
VIEW THE DOCUMENT21. CHECKLIST: THE SOAP MARKET
VIEW THE DOCUMENT22. CHECKLIST: DATA FOR A FEASIBILITY STUDY
ANNEXES
VIEW THE DOCUMENT23. SERVICES OFFERED BY THE CDI
VIEW THE DOCUMENTOTHER TITLES
VIEW THE DOCUMENTBACK COVER

BACK COVER

Soap production is of great interest to entrepreneurs in the ACP countries because, by upgrading local resources, it can satisfy existing regional demand. Soap production also complements oleaginous production lines if the soap factory is downstream of an existing oil mill. This kind of project can start on a modest basis - virtually on a cottage-industry scale - and a full range of small industrial equipment is available which is suited to the needs and circumstances of these countries.

In straightforward and practical terms, this guide presents the key parameters that should be taken into account for soap factory projects, from raw materials through to the various production processes. Checklists are provided which should facilitate feasibility studies and market studies, as well as a list of consultancy bureaux, equipment manufacturers and potential partners with excellent references.

TO PREVIOUS SECTION OF BOOK

CD3WD Project Donate